WSNet Call Button
SLC 200
The radio-based WSNet Call Button SLC 200 enables a fast and error-free material request for a large load carrier (LLC), at the press of a button.
The SLC 200 submits the request directly to a WSNet gateway GLC 100E by means of its integrated WSNet radio modem. Instantly, WSN’s AMS eKanban system forwards the request to the ERP system. This results in a significantly higher efficiency compared to conventional Kanban work flows.
Thanks to the graphical, high-contrast and power-saving e-paper display of the SLC 200, many status information can be displayed visually. Examples are:
- order status in the ERP system
- alerts and handling instructions
- barcodes and QR codes, for example for material linking by scanner
- Illustration or design drawing of the linked material
The future-oriented LoRa™ wireless technology of the SLC 200 makes theknown problems of WLAN-based systems forget. The device does not occupy an IP address in the LAN’s private address space. In addition, "dead spots" and unstable connections are now finally a thing of the past.
Compared to conventional retrieval systems, the WSNet Call Button SLC 200 offers additional advantages:
- near real-time notification of the demand on the assigned material by pushbutton
- avoiding human failure by means of extensive automation and simple operation
- connection to existing ERP systems via WSN AMS system
- interference-resistant and energy-efficient wireless technology
- high mobility and flexibility thanks to independence from any cable network
- cost-effective installation and maintenance
- high range up to 1,000 m within buildings
- battery change in a few seconds by means of hinge mechanism (screwless)
- battery life up to 12 months
- highly scalable up to several hundred monitored LLC locations
The optional dual AES 128 encryption meets the highest data security requirements.
Due to its robust and dust-tight housing, the Call Button SLC 200 can even be used in harsh industrial environments.
Functions
- wireless material request by the push of a button
- bidirectionality: receiving and sending radio telegrams
- display of material status information, alerts and notifications via integrated e-paper display
- measurement and signalling of battery level
- optional: measurement and radio transmission of environment temperature and relative humidity
Technical Specifications
- main processor: STMicroelectronics STM32 ARM Cortex-M3 RISC MCU
- clock rate: 32 MHz
- RAM: 384 KB FLASH
- radio technology: LoRa LPWAN 868 MHz
- integrated on-board antenna
- transceiver Semtech SX1277
- bandwidth: up to 500 kHz
- data rate: up to 27 kbps
- transmission power: <= +14 dBm
- power consumption: max. 0,2 W
- achievable range up to 1,000 m (within buildings)
- ambient temperature range: 0°C to +55° C
- ambient rel. humidity: 0 to 90 % (non-condensing)
- industrial standard housing
-
- material: polycarbonate, graphite gray like RAL7024 with transparent lid
- dimensions: 151x80x40 mm
- IP65 rated
- graphical display E-Ink 2.9", 296x128 pixels, 112 dpi
- push button actuation force 4 N, vandal protection IK 09, at least 1 million switching cycles
- power supply: 3,6 V lithium cell
Delivery Scope
- LLC material call button with e-ink display and integrated radio module
- lithium battery
- installation guide
- CE declaration of conformity
P/N: 6-10001
LoRa™, LoRa™ Alliance and LoraWAN™ are registered exclusive trademarks of Semtech Corporation.
